Engineering and remote access
7.5 SIMATIC STEP 7
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
203
3. In the hardware catalog, navigate to SITOP PSU8600 under
"PROFINET IO\I/O\PSU8600\PSU8600".
4. Click the desired SITOP PSU8600; keep the left mouse button pressed and drag the
SITOP PSU8600 to the subnet.
5. Double-click on SITOP PSU8600.
In the open dialog box, enter the device name, device number and IP address in the
Ethernet.
6. Save the hardware configuration.
You have now inserted the SITOP PSU8600 into the project. The rectangle displayed in the
editor symbolizes the SITOP PSU8600.
To Next Page
Loading...
