Siemens SITOP PSU8600 - Page 295

Engineering and remote access
7.7 Web server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
295
PROFIenergy
Figure 7-2 Web server 1.2.0 - hardware configuration - PROFIenergy
Parameter
Value range
Default setting
PROFIenergy activated
Yes/no
No
Time to pause [s]
0 - 2147483647
0 ms
Time to operation [s]
0 - 2147483647
0 ms
Minimum dwell time 0 - 2147483647 0 ms
Maximum dwell time
0 - 2147483647
0 ms
Save power consumption
0.000 - 100000.000
0.00 kW
Operate power consumption
0.000 - 100000.000
0.00 kW
Energy consumption to pause [s]
0.000 - 100000.000
0.00 kWh
Energy consumption to operate
0.000 - 100000.000
0.00 kWh
Procedure
1. Select the "Hardware configuration" menu.
2. Select submenu "Device configuration".
3. Select entry "PSU8600".
4. Make the required settings in the editor area.
5. Load the data to the device, see Chapter "Loading the configuration (commissioning)
(Page 277)".
You can find additional information on configuring the outputs in Chapter "Operator control at
the device (Page 79)".