Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
336 Manual, 09.2018, A5E36758446-5-76
Alarm_MD_LessCapableModule
Detected
Boolean Sitop_8600_AlarmType A module with reduced power was
detected. Deviating system behav-
Alarm_MD_ModuleParameters
Corrupt
Boolean Sitop_8600_AlarmType Stored module configuration is
corrupt. Deviating module behavior
Alarm_MD_PowerbusHighResis-
Boolean Sitop_8600_AlarmType High-resistance internal supply
detected. Check connections!
Alarm_MR_General Boolean Sitop_8600_AlarmType General error occurred. Device
behavior remains consistent, how-
Alarm_MR_ModuleParameters
Corrupt
Boolean Sitop_8600_AlarmType Stored module configuration is
corrupt. Module behavior remains
Alarm_MR_MoreCapableModule
Detected
Boolean Sitop_8600_AlarmType A module with excessive power
was detected. Normal operation of
Alarm_MR_NewModuleDetected
New unconfigured module detected
Alarm_MR_UnexpectedModuleDe-
Boolean Sitop_8600_AlarmType Unexpected module type detected.
Alarm_N_SetpointParameterOutOf
Range
Boolean Sitop_8600_AlarmType A control command is attempting to
set a value outside the value range
that the hardware module can
implement. The value is automati-
cally limited to the minimum or
maximum permitted value for the
module.
Alarm_N_SerialNumberDiverge
Different serial number detected
Alarm_N_SoftwareVersionDiverge
Different firmware version detected
See Section "Lock (Page 323)".
See Section "Outputs (Page 325)".