Engineering and remote access
7.8 OPC UA server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
337
/
All variables of the SITOP CNX8600 expansion module are listed together under the
"ParameterSet" node.
SITOP UPS8600 UPS module
ActualState
ModuleAllowedChargingPower Byte MultiStateDiscrete-
Maximum permitted charging po-
ModuleBatteryState Byte MultiStateDiscrete-
Operating state of the battery mo-
ModuleState Byte MultiStateDiscrete-
Operating mode
ModuleReadyToBufferContact Boolean PropertyType Actual state of the signaling contact
ModuleBufferOperationContact Boolean PropertyType Actual state of signaling contact
ModuleOKContact Boolean PropertyType Actual state of signaling contact
ModuleBufferDisabledByInput
Actual state of control contact "ON"
ModuleStartFromBatteryContact Boolean PropertyType Actual state of control contact
ModuleStateLed Object Sitop_8600_LedType Actual state of the LED display
ModuleBatteryLed Object Sitop_8600_LedType Actual state of the LED display
ModuleConnectedBatteryCount Integer AnalogItemType Number of batteries connected to
ModuleModuleIdentNumberBattery1 Integer AnalogItemType Device identification number of the
first connected battery
ModuleModuleIdentNumberBattery2 Integer AnalogItemType Device identification number of the
ModuleModuleIdentNumberBattery3 Integer AnalogItemType Device identification number of the
ModuleModuleIdentNumberBattery4 Integer AnalogItemType Device identification number of the
ModuleModuleIdentNumberBattery5 Integer AnalogItemType Device identification number of the