Siemens SITOP PSU8600 - Page 373

Troubleshooting
8.3 Alarm list web server
Power supply system SITOP PSU8600
Manual, 09.2018, A5E36758446-5-76
373
ID
Severity
Event
Help text
53 N Overload detected at the output. Output current at the output is above the preset response
threshold but is still within the permissible overload profile.
The output current is about to be limited.
54 N The actual value of the output
current is above the set advance
warning threshold.
The actual value of the output current is above the config-
ured advance warning threshold and is below the response
threshold.
55 MR Overload shutdown of the output. Invalid overload occurred at the output. The output was
switched off.
56 N Overload detected at the output. Output current at the output is above the preset response
threshold but is still within the permissible overload profile.
The output current is about to be limited.
57 N The actual value of the output
current is above the set advance
warning threshold.
The actual value of the output current is above the config-
ured advance warning threshold and is below the response
threshold.
58 MR Output is ready to be switched on. Output is ready to be switched on again after automatic
overload shutdown.
59 N Current limit on the output after
occurrence of an overload.
Output is in overload mode. The output current is limited to
the configured response threshold.
60
N
Output was switched off manually.
Output was switched off manually directly on the device.
61 N Output switched off during buffer-
ing
Output switched off during buffering
62 MR Output is ready to be switched on. Output is ready to be switched on again after automatic
overload shutdown.
63 N Current limit on the output after
occurrence of an overload.
Output is in overload mode. The output current is limited to
the configured response threshold.
64
N
Output was switched off manually.
Output was switched off manually directly on the device.
65 N Output switched off during buffer-
ing
Output switched off during buffering
66 MR Output is ready to be switched on. Output is ready to be switched on again after automatic
overload shutdown.
67 N Current limit on the output after
occurrence of an overload.
Output is in overload mode. The output current is limited to
the configured response threshold.
68
N
Output was switched off manually.
Output was switched off manually directly on the device.
69 N Output switched off during buffer-
ing
Output switched off during buffering
70 MR Output is ready to be switched on. Output is ready to be switched on again after automatic
overload shutdown.
71 N Current limit on the output after
occurrence of an overload.
Output is in overload mode. The output current is limited to
the configured response threshold.
72
N
Output was switched off manually.
Output was switched off manually directly on the device.
73 N Output switched off during buffer-
ing
Output switched off during buffering
74 MR Output is ready to be switched on. Output is ready to be switched on again after automatic
overload shutdown.
75 N Current limit on the output after
occurrence of an overload.
Output is in overload mode. The output current is limited to
the configured response threshold.
76 N Output was switched off manually. Output was switched off manually directly on the device.