● Data logging in SensorFlash
● Peak indicators
● Alarm delay
* The SD-Card Mass storage function is not available for use in the USA. This option is not
available for ordering or shall not be ordered where end user may be located within USA.
3.3 Applications
● Water industry
● Wastewater industry
● HVAC industry
● Petrochemical industry
● Irrigation systems
● Plants transporting non-conductive liquids
● Power industry
● Processing industry
3.4 Approvals
Note
For further details see Approvals (Page 129).
The device is available with approvals for general purpose and for hazardous areas. In all
cases, check the nameplate on your device, and confirm the approval rating.
3.5 Modbus communication
This device supports Modbus communication protocol. For further information on the Modbus
communication, see Integrating the FST030 with Modbus system (Page 34) and Modbus
holding registers tables (Page 140).
Description
3.5 Modbus communication
SITRANS FST030 (Modbus)
24 Operating Instructions, 08/2018, A5E37367739-AD
To Next Page
Loading...
