C.1.7 Wizard - Quick Start via PDM
The graphic Quick Start Wizard provides an easy multistep procedure that configures the
device for a simple application.
Please consult the SIMATIC PDM operating instructions or online help for details on using
SIMATIC PDM.
Quick start
Note
● The Quick Start wizard settings are inter-related and changes apply only after you click on
Apply at the end of the wizard to transfer settings to the device.
● Do not use the Quick Start Wizard to modify individual parameters.
● Click on Back to return and revise settings or Cancel to exit the Quick Start.
Launch SIMATIC PDM, open the menu Device – Wizard - Quick Start, and follow the steps.
SIMATIC PDM
C.1 Commissioning with PDM
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 345
To Next Page
Loading...
