Siemens SITRANS FST030 - Communication Wizard (Wizard); Navigating the Menu Structure; Navigation View

6.6.1.6 Communication wizard (wizard)
Start
Quick start
Quick commissioning
Sensor settings
Process values
Inputs and outputs
Copy configuration
Communication
Network Parameters
Floating point byte order
Integer byte order
Next
Finished
Slave address (SW)
Baud rate
Parity and framing
Next
Network Parameters
9600 Bit/s
19200 Bit/s
38400 Bit/s
.....
.....
....
.....
Baud rate
Even parity 1 stop
Odd parity 1 stop
No parity 2 stop
Parity and framing
1-0-3-2
0-1-2-3
2-3-0-1
3-2-1-0
Floating point byte order
MSB - LSB (big endian)
LSB - MSB (little endian)
Integer byte order
6.6.2 Navigating the menu structure
6.6.2.1 Navigation view
The exact structure of the operating menu is explained in the Function Manual.
All items of the menu structure of the device are identified with a unique number.
Level 1 of the menu structure is standardized for all Siemens Process Instrumentation devices
and covers the following groups:
1. Quick start: Lists the most important parameters for quick configuration of the device. All
parameters in this view can be found elsewhere in the menu.
2. Setup: Contains all parameters which are needed to configure the device.
3. Maintenance and diagnostics: Contains parameters which affect the product behavior
regarding maintenance, diagnostics and service.
4. Communication: Contains parameters which describe the Modbus communication settings
of the device.
Commissioning
6.6 Commissioning via local display
SITRANS FST030 (Modbus)
68 Operating Instructions, 08/2018, A5E37367739-AD