NOTICE
Strong vibrations
Damage to device.
● In plants with strong vibrations, mount the transmitter in a low vibration environment.
4.2 Installation instructions
4.2.1 Wall mount housing transmitter
CAUTION
Opening lid
Care must be taken when opening the lid to avoid the lid falling.
Mounting on wall
Note
Mounting screws are not included
You will need four screws, able to support at least 55 lbs (25 kg). Siemens recommends
M6x100 screws with appropriate anchors for the wall material.
Installing/Mounting
4.2 Installation instructions
SITRANS FST030 (Modbus)
26 Operating Instructions, 08/2018, A5E37367739-AD
To Next Page
Loading...
