Siemens SITRANS FST030 - Page 269

Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[unit]
(unit register)
Value range /
Setting options
Access
level
6409 Float / 4 Filter time con‐
stant
Damping filter time for
process values to be
displayed.
1.0 0.0 - 100.0 Read /
write
6411 Unsigned / 4 Process values
(1)
Bit encoded selection
group 1 of process val‐
ues the display damp‐
ing filter impacts.
See Process value fil‐
ter masks (Page 282).
0xFFFE37FF - Read /
write
6413 Unsigned / 4 Process values
(2)
Bit encoded selection
group 2 of process val‐
ues the display damp‐
ing filter impacts.
See Process value fil‐
ter masks (Page 282).
0x00001E7F - Read /
write
View 1 settings
Table A-73 View 1 settings
Modbus
register
Data type /
Size in bytes
Parameter Description Default value
[unit]
(unit register)
Value range /
Setting options
Access
level
9007 Unsigned / 2 View Type of appearance. 3
● 1: Single value.
● 3: Three values.
● 6: 1 value and bar
graph.
● 7: 1 value and graph.
● 8: Six values.
● 9: Six diagnostic
values.
Read /
write
9018 Unsigned / 2 1
st
value Selection of the first val‐
ue.
0 See Selectable values
dependent on the view
type (Page 279).
Read /
write
9019 Unsigned / 2 2
nd
value Selection of the second
value. Depending on
the number of values.
2 See Selectable values
dependent on the view
type (Page 279).
Read /
write
9020 Unsigned / 2 3
rd
value Selection of the third
value. Depending on
the number of values.
3 See Selectable values
dependent on the view
type (Page 279).
Read /
write
9075 Unsigned / 2 4
th
value Selection of the fourth
value. Depending on
the number of values.
1 See Selectable values
dependent on the view
type (Page 279).
Read /
write
9076 Unsigned / 2 5
th
value Selection of the fifth val‐
ue. Depending on the
number of values.
11 See Selectable values
dependent on the view
type (Page 279).
Read /
write
Modbus communication
A.9 Modbus holding registers tables
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 269