The following tables list the fixed display texts and their corresponding process value,
diagnostic value, and compensation value names. Some are available for both water and oil
variants, some only for oil variants (marked *).
Table 7-1 Process values
Fixed display text Process value name
VOL.FLOW Volume flow
MASS FLOW Mass flow
FLOW VEL Flow velocity
SOUND VEL Sound velocity
S.VOL FLOW * Standard volume flow (standard flow rate)
DENSITY Density
KIN. VISCOSITY Kinematic viscosity
PRESSURE Pressure
MEDIUM TEMP. Medium temperature
SPEC.GRAVITY * Specific gravity
TOT1 Totalizer 1
TOT2 Totalizer 2
TOT3 Totalizer 3
S.DENSITY * Standard density
S.SPEC.GRAVITY * Standard specific gravity
STAND.FACTOR * Standardizing factor
LIQUIDENT * This variable represents the measured liquid sonic velocity
API GRAVITY * API gravity
S.API GRAVITY * Standard API gravity
S.KIN.VISCOS. * Standard kinematic viscosity
LIQUID IDENTIFIER * Liquid identifier
ROC * Liquid rate of change
AUX TEMP. Auxiliary temperature
Table 7-2 Diagnostic values
Fixed display text Diagnostic value name (#=channel number)
TRN TEMP. Transmitter internal temperature
SEN.TEMP.1 RTD temperature 1
SEN.TEMP.2 RTD temperature 2
CURR. OUT CH# Current output value
CURR. IN CH# Current input value
PULSE OUT CH# Pulse output amount
FREQ. OUT CH# Frequency output
DIG. IN CH# Digital input value
STAT. OUT CH# Status output value
DSL TEMP. Sensor internal temperature
Operating
7.2 Operating the FST030
SITRANS FST030 (Modbus)
Operating Instructions, 08/2018, A5E37367739-AD 73
To Next Page
Loading...
