Table 7-6 Key functions - alarms list view
Key Function
Exit alarm list view
Select the item above in the list; keep pressing the key to accelerate scrolling up the
selection list
Select the item below in the list; keep pressing the key to accelerate scrolling down the
selection list
View more information on the selected alarm
Press to exit the detailed alarm information.
Alarm acknowledgement
There are two ways to have the alarms removed from the alarm list.
● Manual: The alarm remains in the alarm list until the alarm is manually acknowledged (ack.).
Before the alarm can be acknowledged, the cause must be eliminated. Press to go to the
detailed alarm information. Press again to acknowledge the alarm. The time of the
acknowledgement is shown in the history log.
● Auto: The alarm is removed from the alarm list when the cause is removed (going)
Operating
7.2 Operating the FST030
SITRANS FST030 (Modbus)
78 Operating Instructions, 08/2018, A5E37367739-AD
To Next Page
Loading...
