A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS Page 165
mmmmm
Parameters
2.8.4.4. Assigned Relay
Determines which relay (if any) will be activated when the In-bounds Level
Alarm activates.
2.8.4.5. Alarm State
Read only. Used to view the current state of the In-bounds Level Alarm.
2.8.5. Out-of-bounds Level Alarm
Reported when material level is outside a user-defined range (see 2.8.5.2.High
Level Value
or
2.8.5.3.Low Level Value
).
2.8.5.1. Enable
Enables/disables Out-of-bounds Level Alarm.
2.8.5.2. High Level Value
Sets the upper level value for range outside of which the Out-of-bounds
Level Alarm will activate.
2.8.5.3. Low Level Value
Sets the lower level value for range outside of which the Out-of-bounds
Level Alarm will activate.
2.8.5.4. Assigned Relay
Determines which relay (if any) will be activated when the Out-of-bounds
Level Alarm activates.
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
Options
ACTIVE
INACTIVE
Options
ENALBED
* DISABLED
Values
Range: 0.000 to 99999.000
Default: 0.000
Values
Range: 0.000 to 99999.000
Default: 0.000
Options
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
To Next Page
Loading...
