Configuration
6.1 Basic knowledge for configuring
SIVACON 8PS - Configuring with LX system
Configuration Manual, 10/2011, A5E02194899-02
81
Examples
Description Type designation
Straight trunking unit, 3 m length with 5 tap-off points
at top and bottom
LXA(C)....-3-ADO-U
+LX-A+LX-B+LX-C+LX-D+LX-E
Straight trunking unit, 3 m length with 2 tap-off points
at top
LXA(C)....-3-AD
+LX-B+LX-D
Straight trunking unit, 2 m length with 1 tap-off point
at top
LXA(C)....-2-1AD
Straight trunking unit, 2.8 m length with 1 optional
tap-off point at top as well as fire barrier
LXA(C)....-3W2.80-1AD1.0
+LX..-S120-X0.60
Note
Tap-off point
Installation of the tap-off units is not possible in the area of the joint connection (flange
cover). The usefulness of the tap-off point therefore depends on the position of the tap-off
point and on the dimensions of the selected tap-off unit. All selectable dimensions specified
in m.
The changed position of the tap-off points must be noted when rotating.
To Next Page
Loading...
Need help?
General
