Siemens SOMATOM Manual&Nbsp;

104
Workflow Information
All scan protocols selected in Step 2 are displayed. For
each parameter you can select the scan protocols you
want to apply your changes. The <Select All> check-
box is convenient for the user to select and deselect all
scan protocols listed. If the parameter values in the
selected rows are the same, the value will appear in the
corresponding entry, otherwise if the parameter val-
ues in the selected rows are different, no value is dis-
played in the subsection.

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM