Siemens SOMATOM Manual&Nbsp;

Workflow Information
105
Protocol
Select single scan protocol or all scan protocols you
want to modify in this subsection.
In the subsection Protocol the following changes can
be made:
– Protocol Name
This entry is only available in single protocol selec-
tion. Here you can rename your scan protocol.
– Default Patient Position
Enter the patient position you want to have as
default displayed in the Patient Model Dialog.
– Auto reference Lines
Select where you want to have displayed the Auto
reference lines:
•On study level
• On series level
• Off (the entry in the Auto tasking card cannot be
selected)
–Body region
Select in which body region the scan protocol should
be saved and displayed in the Patient Model dialog.

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM