200mV, 2V, 20V, 200V, 750V
4. Set relative value (Optional operation).
Press [Rel] to open or close Relative math function. When it is open, the reading displayed is a
relative value which comes from the result of actual measurement value subtracts the value that
has been set. (Please refer to “Math Functions” in Chapter 2 to know about the details.)
5. Read measurement result.
Period measurement is fixed at “Slow” rate. Therefore, you can’t adjust the reading rate while
reading the result.
6. View history data.
There are four types of way to view historical data: “Number”, “Bar Meter” “Trend Chart” and
“Histogram”.
To Next Page
Loading...
Need help?
General
