Sigma 3-16L User Manual

Laboratory Centrifuge Sigma 3-16L
Laboratory Centrifuge Sigma 3-16L IVD
3 Safety
Version 03/2014, Rev. 2.22 of 24/10/2023 • sb
17 / 84
Original operating manual, part no. 0700902
Pos: 36 /100 Sig ma/100 BA Zentrif ugen Sigma (S tandardmod ule)/030 Sicher heit/030-0031 Verantwortung des Betreibers IVDR @ 26\m od_14053190 16560_68.docx @ 191975 @ 2 @ 1
→
3.3 Responsibility of the operator
The operator undertakes to authorise only trained, specialised personnel to
work on the centrifuge chapter 3.4 - "Requirements concerning the
personnel".
The areas of responsibility of the personnel concerning the operation,
maintenance, and care of the unit must be clearly defined.
The safety-conscious work of the personnel in compliance with the
operating manual and the relevant EC health and safety directives, and the
national laws concerning health and safety and the prevention of accidents
must be checked at regular intervals (e.g. every month).
Under the international rules for health and safety at work, the operator is
obliged to:
• take measures in order to prevent danger to life or health during work.
• ensure that the centrifuges are used properly and entirely as intended
(see chapter 1.2 - "Intended use").
• take protective measures against fire and explosion when working with
hazardous substances.
• take measures for the safe opening of the centrifuges.
The operator must perform a risk assessment concerning potential
accidents in connection with the centrifuge and take design-related
countermeasures, if necessary.
The operator must inform the users that any serious event which either
directly or indirectly had, could have had or could have one of the following
consequences must be reported to the manufacturer or competent
authority:
a) The death of a patient, user or other person,
b) the temporary or permanent degradation of the health of a patient, user
or other person,
c) a serious risk to public health.
The centrifuge has to be maintained regularly (see chapter 8 -
"Maintenance and service").
Components that are not in a perfect state must be replaced immediately.
Pos: 37 /010 Univers almodule/ Seitenwec hsel @ 0\m od_1202116244 312_0.docx @ 105 @ @ 1

Sigma 3-16L Specifications

General

Brand	Sigma
Model	3-16L
Category	Laboratory Equipment
Language	English