Sigma 3-16L - Loading a Program; Switching the Centrifuge Off

Laboratory Centrifuge Sigma 3-16L
Laboratory Centrifuge Sigma 3-16L IVD
6 Using the centrifuge
48 / 84
Version 03/2014, Rev. 2.22 of 24/10/2023 • sb
Original operating manual, part no. 0700902
Pos: 158 /100 Sigm a/100 BA Ze ntrifugen Sigma ( Standardmo dule)/060 Betrieb _Spincontrol L+S/Spincontrol L (Z ent6)/060- 0030-0030- 0021 Programm laden - ohne T emp @ 27\m od_1405319314 200_68.docx @ 193067 @ 4 @ 1
→
6.3.3.2 Loading a program
• Select the menu item "run Prog" and confirm the selection. The
indication "run" flashes in the activated status.
• Select the desired program and confirm the selection by pressing the
function knob.
The program is now loaded.
Fig. 30: Loading a program
Pos: 159 /010 Univ ersalmodule/ Leerzeile @ 0\mod_12 02116244500 _0.docx @ 1 14 @ @ 1
Pos: 160 /100 Sigm a/100 BA Ze ntrifugen Sigma ( Standardmo dule)/060 Betrieb _Spincontrol L+S/060-004 0 Ausschalten @ 27\mod_1 405319212716_6 8.docx @ 19 2591 @ 2 @ 1
→
6.4 Switching the centrifuge off
• Open the centrifuge when it is not in use so moisture can evaporate.
• Switch the centrifuge off by pressing the mains power switch.
Pos: 161 /010 Univ ersalmodule/ Abschnittsw echsel @ 0 \mod_1202 124514062_0.d ocx @ 418 @ @ 1
Pos: 162 /010 Univ ersalmodule/ Seitenwechs el @ 0\mo d_120211624 4312_0.docx @ 105 @ @ 1