Programmable Buttons
Using the FPP, you can set the following programmable buttons (SK1, SK2, and TK) as
shortcuts to radio functions (such as power level switch, zone switch, squelch off) by
using the FPP.
Radio LED Indications
The multi-coloured LED on the Radio is used to indicate the Radio Status. The
meanings of the various coloured LED indications that can be displayed are shown in
the following table.
LEDColour LEDIndication Radio Status
Green On - Receiving.
Slow flashing
green
Standby.
Rapid green
flashing
The radio is upgrading or turning on.
Orange
No voice is being transmitted or received on the traffic
channel after a call is established. Activate PTT key to
talk during this period.
Slow flashing
orange
The radio is scanning.
Rapid orange
flashing
Not used.
Red The radio is transmitting.
Slow flashing
red
The battery level is low.
Table 4: Radio LED Indication.
Doc Number: TNM-U-E-0156 Issue: 2.3 Page 7
To Next Page
Loading...
Need help?
General
