Simoco SDP760 - Settings and Customization; Function and Mode Settings

6 Settings
The Settings Menu allows the user to access some of the general settings and
functions of the radio.
Function
The Function Menu allows the user to access some of the general functions of the
radio.
To access the Function menu, from the home screen, select ‘Settings’ > ‘Function’.
Mode
The SDP760 radio can operate in either of the Conventional (digital and analogue),
DMR Trunking, and MPT Trunking modes.
To access the Mode menu, from the home screen, select ‘Settings’ > ‘Function’ >
‘Mode’.
Figure 24: Mode Menu Screen
To select the required mode, use the ▼ and ▲ keys to select the mode and select
‘OK’.
Note: Selecting the ‘Conventional’ option will access the analogue or digital
conventional mode.
Power Level
The SDP760 radio can operate at two power levels, Low and High. The desired level is
set on the Power Level screen.
To access the Power Level menu, from the home screen, select ‘Settings’ > ‘Function’ >
‘Power Level’.
Doc Number: TNM-U-E-0156 Issue: 2.3 Page 25