Backlight Off Time
The Backlight Off menu allows the user to select the timeout period of the control
unit’s backlight.
Figure 41: Backlight Off Menu
When the backlight is enabled, the control screen will be illuminated whenever there is
any user activity. The backlight will remain on with no further user activity for the set
period, after which, the backlight will turn off.
The maximum backlight timeout period is programmed by the FPP.
Note: Received radio traffic events will not prevent the backlight timeout.
Use the ▼ and ▲ keys to select the required backlight timeout period.
To accept and save the setting, press the ‘OK’ key.
Display Off Mode
To access the Display Off Mode menu, from the home screen, select ‘Settings’ > ‘Radio
General Settings’ > ‘Display’ > 'Display Off Mode'.
Display Off Mode allows the user to turn the backlight off or dim the full display once
the backlight timer has been modified.
Figure 42: Display Off Mode
Doc Number: TNM-U-E-0156 Issue: 2.3 Page 35
To Next Page
Loading...
