Tone
The Tone menu allows the user to enable or disable the following acoustic tones
associated with specific activities on the radio: Keypad tone; Talk Permit tone;
Incoming Call tone; Function tone; Warning tone; Low Battery tone; Emergency tone;
and Message tone.
To access the Tone menu, from the home screen, select ‘Settings’ > ‘Radio Settings’ >
‘Tone’.
Figure 45: Tone Menu
To enable or disable a specific tone carry out the following:
1. From the Tone menu, use the ▼ and ▲ keys to select the required tone and
press the ‘Enter’ key.
2. On the relevant tone screen, use the ▼ and ▲ keys to select either On or Off as
required and press the ‘OK’ key.
Figure 46: Keypad Tone Screen
LEDs
The LED menu allows the user to decide whether to enable or disable the following LED
indications associated with activities of the radio: Tx LED; Rx LED; Scan LED; Low
Battery LED; Incoming Call LED; and Call Hang LED.
Doc Number: TNM-U-E-0156 Issue: 2.3 Page 37
To Next Page
Loading...
Need help?
General
