Simplex 4010 Service Manual

IN-1
Misc.
24 point I/O card troubles
missing card trouble, 2-14
specific point troubles, 2-14
4009 IDNet NAC Extender
and intermittent IDNet missing card trouble, 2-8
4009 IDNet NAC Extender troubles, 2-16
4010 programmer
features for different revisions, A-2
A
AC power flowchart, 1-4
AC power supply
checking, B-3
replacing transformer/bridge rectifier, B-5
AC power trouble
for power supply card, 2-4
B
bad answer trouble, 2-9
basic service procedures, C-9
battery charger trouble
for power supply card, 2-7
battery depleted disconnected trouble
for power supply card, 2-6
battery low cutout trouble
for power supply card, 2-6
battery low trouble
for power supply card, 2-6
battery terminals
and EPS trouble, 2-4
checking, 2-7
baud rate
and missing card trouble for IDNet card, 2-8
and missing card trouble for NAC, 2-2
and missing card trouble for power supply, 2-4
BIN file
availability of, 1-3
corrupt, damaged, or missing, 1-2
determining software revision, C-9
features for different revisions, A-2
new SFIO has none, B-2
bridge rectifier
checking, B-3, B-6
replacing, B-5, B-8
brownout, 1-4
adjusting, B-2
C
central station trouble
for SDACT card, 2-12
CFIG format mismatch, 1-2, 1-3
class A trouble
for a NAC, 2-2
code scan/link scan loop, 1-2, 1-3
crash codes, 3-2
D
DB version mismatch trouble
for SDACT card, 2-12
diagnostics
network diagnostics, C-5
digital pseudo point troubles, 2-17
duct sensor
problems with remote LED, C-11
duplicate device trouble, 2-9
E
Earth ground troubles
and dual RS-232 card, 2-5
and power supply card, 2-5
intermittent, 2-5
EPS battery trouble, 2-5
EPS transformer
checking, B-6
replacing, B-8
EPS trouble
for power supply card, 2-4
event queue overflow trouble, C-9
F
fiber optic media card
class A LED displays, D-3
class B LED displays, D-5
overview of components, D-2
I
IAM
and no answer trouble, 2-9
IDNet device # 124 or # 24, C-11
IDNet diagnostics, C-3
IDNet Earth fault search diagnostics, C-4
IDNet troubles
and 4009 IDNet NAC Extender, 2-8
and isolator bases, 2-8
and monitor IAMs, 2-10
and pull stations, 2-10
and RIAMs, 2-10
and TrueAlarm devices, 2-10
and ZAMs, 2-10
bad answer, 2-9
channel failure trouble, 2-8
Class A status trouble, 2-10
duplicate device, 2-9
extra device trouble, 2-10
ground fault status trouble, 2-10
missing card trouble, 2-8
no answer, 2-9
power supply status trouble, 2-10
short status trouble, 2-10
wrong card troubles, 2-9
wrong device, 2-9
Index
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Manufacturer	Simplex
Model	4010
Battery Backup	24 VDC
NAC Outputs	4
Max Detectors	250
Max Modules	250
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	Up to 93% RH, non-condensing