3-2
The following software is required for GCC operation. In some instances, this
software may have already been installed:
• Windows 95 or Windows 3.1/Windows for Workgroups 3.11
operating system
• Required software drivers (mouse, touchscreen, or printer drivers)
• 4190 Graphical Command Center Executive Software
The following software may also be needed:
• Elodev Touchscreen Controller Software Version 2.0C (required if you
are upgrading a 4190 Color Graphics Plus to a GCC; the disk is
included with the touchscreen controller card)
• NPU/GCC System Software
• Microsoft Intellipoint for the Microsoft Mouse, latest version
• IOMEGA Tape Drive Software drivers disk (required if you are
installing a GCC tape drive in the field)
Software Requirements
GCC Requirements
Optional Software
To Next Page
Loading...
