6-4
Tables 6-3 and 6-4 list the possible IRQ settings for the NPU and GCC.
Table 6-3. NPU - Possible IRQ Settings
NPU Device Possible IRQ Settings
2/9 3 4 5 7 10 11 12 15
Touchscreen
(COM1 or COM2)
X X
Service Port
(COM1 or COM2)
X X
Parallel Port X
Bus Mouse X
4190 Network
Card
X X X
UL card
messaging
X X X X X
UL card port A X X X X X X
UL card port B X X X X X X
Table 6-4. GCC Device - Possible IRQ Settings
GCC Device Possible IRQ Settings
2/9 3 4 5 7 10 11 12 15
COMARK serial port A X X
COMARK serial port B X X
COMARK parallel port X X
Bus touchscreen X X X X
4190 Network and
Repeater Cards
X X X X
UL card messaging X X X X X X
UL card port A X X X X X X X
UL card port B X X X X X X X
Note: In order for the COM port interrupts to be mapped as
suggested, enable both serial ports on the COMARK card
by changing the jumper settings.
Interrupt (IRQ) Settings, Continued
Possible IRQ Settings
To Next Page
Loading...
