• Dangerous targets
- Time to closest point of approach - specify the time of
approach in which a vessel is to be considered dangerous.
- Closest point of approach - specify the closest point of
approach in which a vessel is to be considered dangerous.
• Targets of interest - targets further away than the following
distance will be hidden:
- Range of interest - options are Auto (based on radar range if
radar is available) or within a specific distance of own vessel.
• Filtering - define which and how many AIS targets will be shown.
If the amount of targets exceeds the set number, only the most
interesting targets will be shown. For radars that support target
tracking, the following target filter settings will also apply to
tracked targets.
Filter options are:
- Show - all targets, dangerous targets, or no targets.
- Max AIS targets - show all or only a maximum number of AIS
targets.
- Hide slower targets - show targets slower than a specific
speed or all targets regardless of speed.
- Hide lost targets - hide lost targets that are lost for the
specified amount of time.
Speed and course
The extension line can be used to indicate speed and course for
targets, either as absolute (true) motion or relative to your vessel.
AIS icon orientation
Sets the orientation of the AIS icon, either based on heading or COG
information.
History length
Trails can be used to visualize the previous positions of a target.
The history length defines the time presentation of the trail.
AIS | GO XSE/XSR Operator Manual
145
To Next Page
Loading...
Need help?
General
