Refer to "Audio" on page 182 for more information.
BEP CZone integration
The unit integrates with the BEP CZone system. It is used for
controlling and monitoring a distributed power system on your
vessel.
The CZone icon is available in the toolbar on the Home page when
a CZone system is available on the network.
A separate manual is provided with your CZone system. Refer to this
documentation and to the unit's Installation manual for how to
install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone
dashboard is added to the instrument panels.
You switch between a panel’s dashboards by swiping left or right
on the panel or by selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for
each of the gauges. Available editing options depend on the type of
gauge and which data sources that are connected to your system.
For more information, refer to "Instruments" on page 179.
CZone digital switching
A CZone digital switching device can be connected to the NMEA
2000 network and configured to allow control from the control bar
of the MFD.
The digital switching bar is displayed in the control bar
automatically when the CZone digital switching device is
configured to be included in the control bar. For information on
how to configure the device to be included in the control bar, refer
to the CZone digital switching device documentation.
Digital switching configurations dialog
CZone digital switching devices can be disabled from the digital
switching configurations dialog.
230
Integration of 3 party devices | GO XSE/XSR Operator
Manual
To Next Page
Loading...
Need help?
General
