Basic operation
Turning the system on and off
The system is turned on by pressing the Power key.
Press and hold the Power key to turn the unit off.
If the key is released before the shut-down is completed, the power
off process is cancelled.
You can also turn the unit off from the System Controls dialog.
First time startup
When the unit is started for the first time, or after a reset, the unit
displays a series of dialogs. Respond to the dialog prompts to make
fundamental settings.
You can perform further setup and later change settings using the
system settings dialogs.
Remote controllers
You can connect a remote controller to the network and remotely
control the unit. A separate manual is included with the remote
controller.
To find out which remote controllers can be used, refer to the
product web page at:
www.simrad-yachting.com
Smart devices can also be connected to the unit and remotely
control the unit. For information about how to connect smart
devices to remotely control the unit, refer to "Remote control of the MFD"
on page 205.
System controls dialog
The System Controls dialog provides quick access to basic system
settings.
The buttons displayed on the dialog vary with operational mode
and connected equipment.
For those functions that toggle on and off, a highlighted button
indicates the function is activated.
Display the dialog by:
2
Basic operation | GO XSE/XSR Operator Manual
23
To Next Page
Loading...
Need help?
General
