Simrad GO XSE Series User Manual

TripIntel
About TripIntel
TripIntel lets you store and recall information on trips. You can use
the information to make informed decisions prior to commencing a
trip, or when a trip is underway.
Current trip statistics
The Information tab on the TripIntel page shows current trip
statistics:
• Distance traveled
• Time traveled
• Average speed
• Maximum speed
• Fuel economy
• Fuel used
Automatic trip recording
There is an automatic trip detection feature. When you start
navigating you are prompted to start recording the trip if no trip is
currently underway and your vessel speed exceeds the Speed
threshold setting in the Tracks and Trips settings dialog. You will be
prompted to continue a trip or start a new trip if the trip was not
explicitly saved before a power off.
You can manually start the recording later from the TripIntel page.
7
TripIntel | GO XSE/XSR Operator Manual
69

Simrad GO XSE Series Specifications

General

Touchscreen	Yes
Chartplotter	Yes
Resolution	1280 x 720 pixels
Chart Compatibility	C-MAP, Navionics
Radar Compatibility	Compatible with Simrad HALO radar
Card Slots	MicroSD card slot
Operating Voltage	12V DC
Operating Temperature	-15°C to 55°C
Weight (7")	0.9 kg
Display Size	7", 9"
GPS	Built-in GPS
Sonar	CHIRP