Sindoh A413dn - Precautions for Installation and Use

10
Before Use
5. Precautions
Follow below instructions along with Safety Information provided when you purchase the device.
Install the device
Warning
- Install the device where good ventilation is provided.
Ozone is generated while the device is operating. Though the ozone amount is not
dangerous, if the device is used for a long time or a large number of sheets are printed,
sufficient ventilation is needed.
Caution
- Keep the device’s vents a least 10 cm away from walls and other equipment.
- Secure sufficient space around the device for easy ventilation and operation.
- Use the device with temperatures of 10
C ~ 32 C and relative humidity of 20% ~ 80%.
- Do not install or use the device outdoor.
- To scan the 11 x 17 paper, keep the device’s back 15 cm away from surroundings.
Move the device
Warning
- Before moving the device, be sure to unplug the power cord. Use at least two people to
move the device.
- Remove the toner cartridge when moving the device.
- Hold the bottom of the device when moving the device.
Bend your needs enough to protect your spine when lifting the device.