Sindoh A413dn - Cartridge Preparation and Installation

2-3
Printer Installation
2. Cartridge Preparation
Unpack and install the cartridge in the following order.
1
Cut the bag to the guideline to open it and pull out the cartridge.
Caution
- If the unpacked cartridge is exposed to direct sunray or strong light, it may be damaged.
Keep the unpacked cartridge in the shade or cover it with newspaper.
- Do not touch the green drum. Use the handle.
- Lay a sheet of paper down and put the cartridge on it to prevent the cartridge from being damaged.
2
Remove packing materials from the cartridge.
Caution
- Do not touch the drum beneath the cartridge.