Printer Installation
2-14
6. Connecting Cables
Connecting USB Cable
The printer can be directly connected to the PC via the USB cable.
Applicable device model : A410
Caution
-
While the device is on, do not connect or disconnect any communication ports.
The printer can be connected via the USB cable and its USB port supports the USB standard.
1
Check if the power of the printer, the computer, and the other connected devices is turned off.
2
Connect the printer to the PC via the USB cable. The USB port needs the USB cable.
Check if the symbol on the printer matches that on the cable.
Connecting Network Cable
The printer can be directly connected to the network using a standard network cable.
Follow the instructions below to connect to the network.
Note
-
Most networks use 10BaseT/100BaseTX Fast Ethernet port as the standard.
1
Check whether the power has been turned off on the printer, computer or other connected devices.
2
Use the standard cable compatible with the user network to connect the printer to the LAN or hub.
To Next Page
Loading...
