1-7
Introduction
1
5. Specification for Printer Paper & Feeding
This is an introduction of specifications for each type of printer paper used in the printer and paper feeding.
Refer to
the printer paper guidelines on pages 4-13, especially on card stock or label paper.
Feeder Feeding per paper type Paper size Weight
Tray 1 Standard paper: 250 sheets
Thick Paper: 100 sheets
A4, A5, JIS B5,
Folio, Letter, Legal,
Executive, Statement
60~105 g/m²
(16~28lb)
Tray 2 (Small) Standard paper: 250 sheets
Thick Paper:100 sheets
A4, A5, JIS B5,
Folio, Letter, Legal,
Executive, Statement
60~105 g/m²
(16~28lb)
Multipurpose
tray
Standard paper: 50 sheets
Envelope: 5 sheets
Label: 15 sheets
Card stock: 5 sheets
Paper size between
76.2 X 127mm (3 x 5 inch) min.
216 X 355.6mm max.
(8.5 x 14 inch)
60~166 g/m²
(16~53 lb)
Card stock 90lb
Duplex (2-sided) printing is as follows.
Paper size Weight Feeder
A4(210X297)
Letter (216X279)
Standard paper
60~90 g/m² (16~24lb)
Stacking into default output tray
Note :1
Load in the Tray 1 the thick paper, and the paper with size of A5 or bigger to the upper limit set
for the paper with intermediate size inside the tray.
For optimized printing quality for papers smaller than size of A5, using multipurpose tray is
recommended.
Caution
-
Multipurpose input tray can hold up to 50 sheets of paper or up to 10 more based on thickness.
To Next Page
Loading...
