Sindoh A413dn - SSID Settings; Encryption Method Settings; Password Setting

Using the Printer
3-25
4
① Select On and press 【OK】.
② You can set to Wi-Fi on your mobile device.
SSID Settings
You can set the name of the printer searched on your mobile device.
1
When the printer is ready, press the【◀】,【▶】 button.
2
Press 【◀】or【▶】 until Network Settings appear, and press 【OK】.
3
Press button until you see Network Settings -> Wireless Network -> Wi-Fi Direct -> SSID Settings
4
Enter SSID (Printer Name) and press 【OK】.
Encryption Method Settings
You can set the encryption method for connecting to the printer.
1
When the printer is ready, press the【◀】,【▶】 button.
2
Press 【◀】or【▶】 until Network Settings appear, and press 【OK】.
3
Press button until you see Network Settings -> Wireless Network -> Wi-Fi Direct -> SSID Settings
4
Select a desired encryption method and press 【OK】.
5
See “IP Encryption Methods” for encryption methods.
Password Setting
You can set the password necessary to connect to the printer.
1
When the printer is ready, press the【◀】,【▶】 button.
2
Press 【◀】or【▶】 until Network Settings appear, and press 【OK】.
3
Press button until you see Network Settings -> Wireless Network -> Wi-Fi Direct -> SSID Settings
4
① Enter new password.
* If a password already exists, a password confirmation page will appear first.
② Re-enter new password to confirm.
③ If new password and the re-entered password match, the new password will be saved.
To enter password, see 「How to Enter Wi-Fi Password」 p. 3-19.