- 10 -
16642
Version 02
EN
1. Safety instructions
EN
1. Safety instructions
1.9 Notes concerning the type identifica-
tion plate
The type identification plate indicates the
type designation, order code and other key
details of the machine.
To make sure no information is lost if the
type identification plate becomes illegible,
enter the details in this manual:
Type ________________________________
Code ________________________________
Date of manufacture ___________________
1.11.3 Electrician
Person with appropriate professional edu-
cation, knowledge and experience to detect
and avoid electrical hazards.
1.12
Providing briefing for external technicians
Prior to commencing any activities, external
technicians must be informed by the op-
erator of the company’s safety policies, the
applicable accident prevention procedures
and the functions of the machine, in which
the product is installed, and of its protective
devices.
1.13
Provision of personal protective equipment
The employer must provide to the operator
suitable personal protective equipment for
the location and purpose of the operation.
1.14 Operation
1.10 Notes concerning CE marking
The product bears the CE marking and con-
forms to the following European directives:
○ 2014/30/EU, Electromagnetic compa-
tibility
1.11
Persons authorised to operate the device
1.11.1 Operator
A person who is qualified to carry out the
functions and activities related to normal
operation based on his or her training,
knowledge and experience. This includes
avoiding possible hazards that may arise
during operation.
1.11.2 Mechanical specialist
Person with appropriate professional edu-
cation, knowledge and experience to detect
and avoid the mechanical hazards that may
arise during transport, installation, commis-
sioning, operation, maintenance, repair and
disassembly.