To Next Page

To Previous Page

- 16 -

16642

Version 02

3. General description

3.1 SKF 40PGA pump

SKF-40PGA is a pneumatic central lubri-

cation system pump developed for use in

vehicles. The main purpose of the pump is to

feed lubricant into a centralised lubrication

system.

CAUTION

Please read and follow the general and

safety instructions included in this man-

ual. Failure to follow these instructions

may result in serious injury or damage to

the lubrication system or the lubricated

equipment.

3.2 Single-line SKF MonoFlex lubrication

system

SKF MonoFlex is a single-line centralised

lubrication system in which lubricant is

pumped through piping to dosers. Dosers

feed a prescribed amount of lubricant to lu-

brication points.

The system’s operation is controlled and

monitored by a control unit. The control

unit controls the system based on a pre-

set starting interval setting and monitors

the pressurisation of the system and the

amount of lubricant dosed. If the system’s

pressure does not reach its preset value

during the maximum pressurisation time or

the amount of lubricant falls to the set lower

limit, the control unit will generate an alarm.

SKF 40PGA User Manual

Other manuals for SKF 40PGA