SKF 40PGA User Manual

- 8 -
16642
Version 02
EN
1. Safety instructions
EN
1. Safety instructions
1. Safety instructions
1.1 General safety instructions
○ These safety instructions should be read
and followed by any persons working on
the product and those who supervise or
instruct the group of persons mentioned
above. In addition, the owner must
ensure that the relevant personnel are
fully familiar with the contents of the
instructions.
○ These instructions must be kept near
these products for periodic review and for
review by new users of these products.
○ The described products have been
manufactured according to the state of
the art. However, if the products are used
for other than their intended purpose,
there may be new risks that arise which
may result in personal injury or property
damage.
○ Any malfunctions which may affect safety
must be remedied immediately. In addi-
tion to these instructions, general statu-
tory regulations for accident prevention
and environmental protection must be
observed.
1.2 General behaviour when handling the
product
○ Please follow these instructions when-
ever you use the product. If the product is
not in proper and safe technical condition
or you are unaware of the potential haz-
ards, do not use the product.
○ Familiarize yourself with the functions
and operation of the product. All specified
assembly and operating steps must be
competed in the indicated order.
○ Any points regarding proper and safe
condition or correct assembly/operation
that you do not understand must be clar-
ified. Operation is prohibited until issues
have been clarified.
○ Keep unauthorized persons away.
○ Always wear appropriate personal
protective equipment.
○ Responsibilities for different activities
must be clearly defined and observed.
Uncertainty is a major risk factor for
safety.
○ Safeguards and other protective and
emergency equipment must not be re-
moved, modified, disconnected or other-
wise disabled. Their completeness and
function must also be checked at regular
intervals.
○ If a safeguard or other protective equip-
ment has to be detached, it must be
reattached and tested immediately after
the work is complete and before using the
product.
○ Remedy any faults included in your area
of responsibility. If the fault is beyond
your competence, notify your supervisor
immediately of the fault.
○ Do not stand on or climb on any parts of
the centralised lubrication system or of
the machine.
1.3 Intended use
This equipment supplies lubricants within a
centralised lubrication system in accordance
with the specifications, technical data and
limits stated in these instructions:
Usage is allowed exclusively for professional
users in commercial and economic activities.

SKF 40PGA Specifications

General

Brand	SKF
Model	40PGA
Category	Water Pump
Language	English