- 7 -
16642
Version 02
EN
Explanation of symbols, signs and abbreviations
EN
Abbreviations and conversion factors
re. regarding °C degrees Celsius °F degrees Fahrenheit
approx. approximately K Kelvin Oz. Ounce
i.e. that is N Newton fl. oz. fluid ounce
etc. et cetera h hour in. inch
poss. possibly s second PSI pounds per square inch
if appl. if applicable d day sq.in. square inch
a.a.r. as a rule Nm Newtonmeter cu. in. cubic inch
incl. including ml millilitre mph miles per hour
min. minimum ml/d millilitre per day rpm revolutions per minute
max. maximum cc cubic centimetre gal. gallon
min minute mm millimetre lb. pound
etc. et cetera l litre hp horse power
e.g. for example dB (A) sound pressure level kp kilopound
kW kilowatt > greater than fpsec feet per second
U Voltage < less than Conversion factors
R resistance ± plus/minus length 1 mm = 0.03937 in.
I current
Ø
diameter Area 1 cm² = 0.155 sq.in
V volt kg kilogram volume 1 ml = 0.0352 fl.oz.
W watt rh relative humidity 1 l = 2.11416 pints (US)
AC alternating current ≈ approximately mass 1 kg = 2.205 lbs
DC direct current = equal to 1 g = 0.03527 oz.
A ampere % per cent Density 1 kg/cc = 8.3454 lb./gal (US)
Ah Ampere hour ‰ per mille 1 kg/cc = 0.03613 lb./cu.in.
Hz Frequency [Hertz] ≥ Equal to or greater than Force 1 N = 0.10197 kp
NC normally closed ≤ Equal to or less than Pressure 1 bar = 14.5 psi
NO normally open mm
2
square millimetre temperature °C = (°F-32) x 5/9
output 1 kW = 1.34109 hp
acceleration 1 m/s² = 3.28084 ft./s²
speed 1 m/s = 3.28084 fpsec.
1 m/s = 2.23694 mph