To Next Page

To Previous Page

- 2 -

16642

Version 02

ENEN

Juha Kärkkäinen

Manager RD Nordic

SKF Lubrication Business Unit

EC Declaration of incorporation following machinery directive 2006/42/EC, annex II, part 1 B

Manufacturer

SKF Lubrication Systems Muurame Teollisuustie 6, FI-40951 Muurame, Finland

hereby declares that the partly completed machinery:

Designation: Pneumatic lubrication pump for vehicle lubrication systems

Type: 40PGA

Type designations: 40PGAP-170-24-PS

40PGAS-2L-24-PS

40PGAA-4L-24-PS

40PGAA-10L-24-PS

Year of construction: [The model indicated in the type identification plate] complies with the following basic safety and health requirements of the

EC machinery directive 2006/42/EC at the time when first being launched in the market.

1.1.2. 1.1.3, 1.1.5, 1.1.6, 1.3.1, 1.3.2, 1.3.4, 1.3.7, 1.5.4, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.7.1, 1.7.2, 1.7.3, 1.7.4

The relevant technical documentation has been compiled in accordance with Annex VII part B of the directive. Upon justifiable request, these special technical

documents can be forwarded electronically to the respective national authorities. The person empowered to assemble the technical documentation on behalf

of the manufacturer is Manager RD Nordic. See the manufacturer’s address.

Furthermore, the following directives and harmonised standards were applied in the respective applicable areas:

2006/42/EC Machinery Directive: EN ISO 12100-1/A1, EN ISO 12100-2/A1

Pneumatic fluid power: EN ISO 4414:2011-4

The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with

the previsions of machinery directive 2006/42/EC and any other applicable directives.

In Muurame, 23 June 2016