MAINTENANCE PROCEDURES
mmo2011-006-003_a
1. Grease fittings
mmo2011-006-004_a
1. Grease fittings
Steering and Front Suspension
Condition
Visually inspe ct steering and front sus-
pension for tightness of components
(steering arms, control arms and links,
tie rods, ball joints, ski bolts, ski legs,
etc.). If necessary, contact an autho-
rized Ski-Doo dealer.
Skis
Wear and Condition of Skis and
Runners
Check the condition of the skis and ski
runner carbides. If worn, contact an
authorized Ski-Doo dealer.
WARNING
Excessively wo rn skis and/or ski
runners will adversely affect snow-
mobile control.
Fuses
Fuse Inspection
The electrical system is protec
ted with
fuses.
Check fuse condition and replace it if
necessary.
To remove fuse from holder, pull fuse
out. Check if filament is melted.
1
2
A15E0KA
1. Fuse
2. Check if melted
WARNING
Do not use a higher rated fuse.
WARNING
If fuse has burnt out, s ource of mal-
function should be determined
and corrected before restarting.
See an authorized Ski-Doo dealer
for servicing.
Fuse Location
The fuse box is located behind the front
seat upholstery at the LH front lower
portion of seat.
Refer to the decal inside the fuse box
cover or the
SPECIFICATIONS
subsec-
tion for fuse identification.
To access the fuse box, carefully pull
seat upholstery out of the aluminum
extrusion by pu llin g th e plas tic s trip
downwards and sideways at the same
time.
108
______________
To Next Page