SPECIFICATIONS
SYSTEM MODELS
ENGINE 600 HO E-TEC
Engine type Rotax
®
593, liquid c ooled w/Reed valve, 3D-RAVE
Cylinders
2
Displacement 594.4 cm³ (36.27 in³)
Bore 72 mm (2.83 in)
Stroke 73 mm (2.87 in)
Maximum horsepower engine RPM 8100 RPM
Fuel injection system E-TEC direct injection
Exhaust system Single tuned pipe, baffle muffler
Engine oil
XPS S YNTHETIC 2-STROKE OIL (P/N 293
600 132)
Engine oil tank capacity 2.8 L (3 qt (U.S. liq.))
Coolant
Ethyl glycol/water mix (50% coolant, 50% distilled
water). Use BRP premix coolant or c oolant
specifically designed for aluminum engines
Recommended fuel type
Premium unleaded (fuel with NO ethanol or Fuel
which may contain up to 10 % MAX ethanol)
91 Pump Posted AKI (RON+MON)/2
Minimum oc tane rating Refer to
FUEL REQUIREMENTS
92 RON
Fuel tank capacity 45 L (11.9 U.S. gal.)
ENGINE 1200 4-TEC
Engine type
Rotax 1203, liquid cooled, 4-Stroke, D.O.H.C.
with balancer shaft, dry sump
Cylinders
3
Displacement 1 170.7 cm³ ( 71.44 in³)
Bore 91 mm (3.58 in)
Stroke 60 mm (2.36 in)
Maximum horsepower engine RPM 7800 RPM
Fuel injection s ystem Multi point EFI, 52 mm heated throttle body
Exhaust system Exhaust pipe, muffler
Engine oil
XPS 4-STROKE SYNTHETIC OIL (ALL
CLIMATE) (P/N 293 600 112)
Engine oil tank capa city Oil change with filter: 3.5 L (3.7 qt (U.S. liq.))
Coolant
Ethyl glycol/water mix (50% coolant, 50% distilled
water). Use BRP premix coolant or c oolant
specifically designed for aluminum engines
Recommended fuel
type
Regular unleaded (fuel containing maximum
10% ethanol)
122
______________
To Next Page