CONTROLS, INSTRUMENTS AND E QUIPMENT
Unit Sele cti on (KM/H vs M P H)
The units can be set in metric or impe-
rials. Refer to an authorized Ski-Doo
dealer.
Language S election
The gauge display language can be
changed. Refer to an authorized
Ski-Doo de ale r for langu ag e availability
and s etup the gauge to your prefer-
ence.
14) B ackrest
A fixed backrest is installed on the pas-
senger seat.
15) Passenger Seat (1+1)
A 1+1 passenger seat is provided as
standard equipment.
WARNING
Any passenger must be able to
firmly lay is feet on the footrests
and keep his hands on the grab
handles at all times when seated.
Respecting those physical crite-
ria is important to ensures that the
passenger is stable a nd to reduce
the risks of ejection.
Passenger Seat Removal
To remove the passenger seat, pro-
ceed as follow s:
1. Disconnect the accessories con-
nector by turningtheplastic housing
counterclockwise.
NOTE: The connector is locatedonthe
LH side of the storage box.
mmo2009-004-016_a
1. Accessories connector
2. Install the rubber plug on the con-
nector.
3. Push the latch tab in and lift-up the
rear of seat.
mmo2009-004-017_a
Step 1: Push tab
Step 2: L ift rear of seat
4. Slide s eat rearward and set aside.
Passenger Seat Installation
To install the passenger seat, proceed
as fo llow s:
1. Place the passenger seat facing for-
ward on th e storage box lid.
2. Slightly incline the passenger seat
towards front and engage both seat
hooks in the storage box lid slots.
56
______________
To Next Page