CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2007-009-066_w
M) Message Display
mmo2007-009-066_c
1. Message display
Refer to
PILOT LAMPS AND MES-
SAGES
in this subsection for details on
usual messages.
Refer to
MONITORING SYSTEM
for
details on malfunction and D.E.S.S. re-
lated messages.
N) Coolant Temperature
Bar gauge that continuously indicates
the engine coolant temperature.
H
C
1
mmo2009-004-049_a
COOLANT TEMPERATURE
1. Range
O) Air Control Suspension
Displays rear suspension air shock ab-
sorber set poin t and actual setting.
P) E-TEC Engine Storage M ode
Displays OIL when the storage mode
procedure is initiated.
Gauge Setup
Clock Setting
NOTE: This clock diplays in the
24-hour format only.
Press the SET (S) button to select clock
mode.
mmo2007-009-066_p
1. Clock mode
Press and hold the SET (S) button to ac-
tivate clock s et-u p.
mmo2007-009-066_k
To change HOURS, while the value of
HOURS is blinking, use the SET (S) but-
ton to change hours.
To change MINUTES, w hile the value
of HOURS is blinking, press the MODE
(M)buttontoswitchtominutes. Use
the SET (S) button to change minutes.
Press the MODE (M) button t o save
clock set-up and ex it mode.
_______________
55