STORAGE
NOTE: The gauge will display OIL
when the storage procedure is initi-
ated.
7. When gauge displays OIL,release
button and wait for the lubrica tion
function to end.
mmr2009-004-004
Do not touchanything duringenginelu-
brication cycle.
The engine lubrication function takes
approx im ately 1 minute. During this
time engine RPM will increase slightly
to approximately 1600 RPM and the oil
pump will "oil flood" the engine.
At the end of engine lubrication func-
tion, the ECM will stop the engine .
Remove tether cord cap from engine
cut-off switch.
NOTICE
Do not start the engine
during storage period.
______________
113
To Next Page