CONTROLS, INSTRUMENTS AND E QUIPMENT
mmo2009-004-044_a
1. Rubber tie
3. Turn the clip 1/4 turn counterclock-
wise to unlock.
mmo2009-004-045_a
1. Clip
4. Slightly lift the rear of side panel,
then open sideways.
Lower Side Panel Closing
1. Insert the panel tab into the bottom
pan slot.
mmo2011-006-101_a
1. Lower side panel tab
2. Bottom pan slot
2. Insert the lower section of side
panel over the aluminium chassis
and the alumin ium tab into the panel
slot.
mmo2009-004-047_a
1. Lower section
2. Aluminium chassis
3. Aluminium tab
4. Panel slot
3. Insert the panel dowel into the tun-
nel hole.
mmo2011-006-102_a
1. Dowel
2. Tunnel hole
4. Hook the rubber tie.
5. Lock the clip by turning it 1/4 turn
clockwise.
Lower Side Panel Removal/
Installation
1. Open lower side panel as expl
ained
above.
2. Lift the front of side pane
l and free
the lower hinge from its slot.
3. Free the upper hinge by
lowering
the panel.
Reverse procedure for
installation.
66
______________
To Next Page