BREAK-IN INSPECTION
BREAK-ININSPECTION(600HOE-TEC)
Inspect engine m otor mounts
Inspect exhaust system and check for leaks
Tighten exhaust manifold screws to spe cified torque
Check coolant level
Inspect fu el lines and co nnections
Inspect throttle cable
Inspect drive belt
Visually inspect drive pulley
Tighten drive pulley retaining screw to specified torque
Inspect driven p ulley
Adjust and align track
Change gearbox oil
Check brake fluid level
Inspect brake hose, pads and disk
Inspect steering mechanism
Inspect skis and runners
Inspect front suspension
Inspect rear suspension (including stopper straps an d slider shoes)
_______________
87
To Next Page