EasyManua.ls Logo

Skoda Scala 2020 - Automatic gearbox; Operation

Skoda Scala 2020
203 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings
Automatic activation
Upon start-up of the engine.
By selecting the driving mode Eco » page 130, Op-
eration.
Deactivate/activate system
Press the
button.
When the system is deactivated, the symbol illumi-
nates in the button
.
If a system-related engine switch-o occurs and the
system is deactivated, the engine will start.
Troubleshooting
The engine does not switch o when stopping, or
it starts before starting up
The system has detected that the engine is running.
Manual gearbox
Operation
NOTICE
Danger of engine damage!
Shift into higher gear before reaching the red area
of the rev counter scale.
NOTICE
Danger of gearbox damage!
Depress the clutch pedal all the way down.
If not in the process of changing gear, do not leave
your hand on the gearshift lever.
Engaging reverse gear
Stop the vehicle.
Depress the clutch pedal completely.
Move the shift lever to the neutral position.
Push the gearshift lever down.
Set this completely to the left.
Wait briey.
Engage reverse gear.
Automatic gearbox
Lever positions
Parked vehicle
The drive wheels are
locked.
Only set the posi-
tion when the vehi-
cle is stationary.
Reverse gear
Only set the posi-
tion when the vehi-
cle is stationary.
Neutral
There is no transmission of engine power to the
wheels.
Forward drive / sports program
The gear is changed automatically.
In
mode, the gear is changed at higher speeds
than in mode.
Choose between and (spring-loaded posi-
tion)
Moving the selector lever out of the
or position
lights up - the selector lever is locked
Press the brake pedal,
and at the same time,
press the button in the
selector lever.
WARNING
Risk of the stationary vehicle rolling away automati-
cally!
When the selector lever is in the position, po-
sition or in manual shift mode, secure the vehicle
with the brake.
Operation
Starting up
Keep the brake pedal depressed.
Start the engine.
Press the button in the selector lever and set it to
the desired position.
Release the brake pedal and press the accelerator
pedal lightly.
Speeding up while driving (kick-down)
Fully depress the accelerator.
128
Starting and driving › Manual gearbox

Table of Contents

Related product manuals