Reversing light
›
Open the boot lid.
›
Release and remove
the cover cap in the
boot lid.
›
Turn and remove the
socket with the bulb.
›
Change the bulb in the
socket.
›
Push the base with the
new light bulb into the
luminaire so that the
guide lugs on the base
and the associated
openings in the lumin-
aire are ush.
›
Turn the socket clock-
wise
to secure.
›
Insert the cover cap until it clicks into place.
Interior lighting
Operation
Switching on automatically
The lighting switches on when one of the following
events occurs.
▶
The vehicle is unlocked
▶
One of the doors is opened
▶
The ignition key is removed (vehicle without start-
er button)
Automatic switch o
The lighting switches o when one of the following
events occurs:
▶
The vehicle is locked
▶
The ignition is switched on
▶
About 30 seconds after all the doors have been
closed
Operation of the lighting
Middle
position
of the
switches
Automatically switch on and switch o
Turn the front and rear lights on/o
Deactivation of automatic activation
Reading lamp left
Reading lamp right
If a door remains open and the ignition is switch-
ed o, the lights will turn o automatically after 10
minutes.
Automatic switching on/o of the footwell light-
ing
The lighting only works when the dipped or parking
lights are on.
The lighting is also switched on automatically after
opening the door (e.g. when getting in or out).
Settings
The brightness level of the footwell lighting is set in
the Infotainment in the following menu when the
low beam or parking light is switched on:
Or:
Interior ambient light
Usage
The ambient lighting ensures a comfortable atmos-
phere in the vehicle interior.
The lighting only works when the dipped or parking
lights are on.
The lighting is also switched on automatically after
opening the door.
Settings
The background lighting brightness settings are set
in the Infotainment system, in the following menu:
Or:
49
Lighting, windscreen wipers and washers › Interior lighting
To Next Page
Loading...
Need help?
General
