Variant with cruise control
A
Activate cruise control (condition for the
subsequent activation of the limiter).
To activate the speed limiter, press button D
or
E
.
Deactivate limiter
Interrupt control (sprung position)
B
Resume control
1)
/ Increase limit
C
Start control with current speed / Reduce
limit
D
Depending on the equipment:
Switch between cruise control and speed
limiter
Or:
Show menu of assist systems - Possibility of
switching between cruise control and speed lim-
iter
Switching to cruise control interrupts the con-
trol.
E
Show menu of assist systems - Possibility of
switching between cruise control and speed lim-
iter
Switching to cruise control interrupts the con-
trol.
Adjusting the speed limit with the buttons
B and
C
By pressing in steps of 1 km/h.
By holding in steps of 10 km/h.
Variant with ACC
Activate ACC (condition for the subsequent
activation of the limiter). To activate the limit-
er, press button A .
Resume control
1)
/ Increase limit in steps of
1 km/h (sprung position)
Stop control (sprung position)
Deactivate the limiter
Increase limit in steps of 10 km/h
Decrease limit in steps of 10 km/h
Start control/Reduce limit in steps of 1 km/h
A
Change between ACC and speed limiter (by
switching to cruise control, control is inter-
rupted)
Limit exceeded
›
Fully depress the accelerator.
Control will continue as soon as the vehicle has de-
celerated to below the set limit.
Troubleshooting
Speed limiter faulty
illuminates
›
Seek the help of a specialist garage.
Cruise control system
Functionality
The cruise control system maintains the set speed
without the accelerator pedal having to be operated.
This, however, is only possible to the extent permit-
ted by the engine output and braking power of the
vehicle.
1)
If no speed limit is set, the current speed is set as the speed limit.
137
Driver assist systems › Cruise control system
To Next Page
Loading...
Need help?
General
